Search

This is a metal clip that is used to hold the Brake Reservoir onto the bracket (see diagram)to fit:Classic Fiat 500 all models (from 1968 on)If you have any questions please contact us for help..

Brand New Choke & Starter Pull Lever AssemblyMade in Italy as originalto fit:Classic Fiat 500 all models F/L/R/G (early models up to 1968)Fiat 126 (all early Pull Lever Start Versions)If you have any questions please contact us for help..

This is a complete Wiring Loom using the Original Type Wiring and with all the correct connectionsComes complete with a Wiring Installation DiagramNOTE: this would need to be converted for RHD vehicles by extending some of the wires from the left to right side of the interior cabin for ..

This kit comprises of all Seven(7) Black Coated Steel & Copper Lined Brake Pipes and Joints ready to fitto your Fiat 126to fit:Fiat 126 all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyThis is for ONE SeatThis is new production of Front Seat Frames complete with all the Metal Springs and RunnersIt has an adjustable frame so the back will adjust back and forwards as per the original ones for all model 500's from 1968 onto fit..

Left Hand Drive Wiring LoomFor cars where the Ignition Switch is in the Center of the DashboardThis is a complete Wiring Loom using the Original Type Wiring and with all the correct connectionsComplete with the Rubber Boots for the rear of the lamps and brake light switch etc ..

Left Hand Drive Wiring LoomFor cars where the Ignition Switch is in the Center of the DashboardThis is a complete Wiring Loom using the Original Type Wiring and with all the correct connectionsComplete with the Rubber Boots for the rear of the lamps and brake light switch etc ..

Left Hand Drive Wiring LoomFor cars where a Steering Lock and Ignition Switch are mounted on the Steering ColumnThis is a complete Wiring Loom using the Original Type Wiring and with all the correct connectionsComplete with the Rubber Boots for the rear of the lamps and brake ..